Cart Login Logout Fran├žais
 

News


A leading supplier of Drill Muds, Polymers, PVC Pipe, and Ground Sampling Supplies, Plastech Plus Inc. is fully committed to helping your company tackle the toughest jobs in the field.


QUESTIONS? CALL US!
1 800 661-6443


Geothermal Heating: The Difference Between Horizontal and Vertical Sensors

October 10, 2017

geothermal heating, horizontal geothermal sensors, vertical geothermal sensors

Did you choose to go with geothermal heating, and now you find yourself deciding between horizontal or vertical sensors? Both recover heat from the earth provided by the sun, the only difference is one does it from the surface and the other from the subsurface. In this article, we will explain the advantages and disadvantages for each method.

How does horizontal geothermal energy work?

Trenches are dug 6 feet (1.8m) deep, into which a network of ducts pass. A coolant, the combination of water and antifreeze, circulates inside the ducts. This is all connected to a heat pump that extracts energy from the ground.

Advantages

  • The depth is perfect for enjoying the heat given off by the sun while avoiding the frost.
  • This free, renewable energy comes straight from the land.
  • This system reduces annual heating costs.
  • Effective in very cold conditions, unlike an air-source heat pump.
  • Not very noisy.

Disadvantages

Horizontal loop systems are less efficient than vertical loop systems because, given the depth, soil temperature is influenced by surface temperature. In addition, this system requires nothing to be built over the ground. Finally, the initial investment is quite substantial, although it is profitable in the long term.

How does vertical geothermal energy work?

As the heat is taken deeper than the horizontal sensor method, the temperature is higher. It increases from 2-4 Co every 100m. Of all the geothermal systems, it is the one most used in a proportion of 82.9%.

For this type, holes with a diameter of 13cm and a depth of 150m are drilled and made to install a U-Shaped loop of high density polyethylene. This is filled with a heat transfer fluid, generally propylene glycol. The loop is also immersed in a grout, such as bentonite, which allows better transmission of heat.

Advantages

  • Vertical boreholes provide less ground clearance than horizontal ones.
  • This system fits perfectly into a floor heating plan.
  • It takes advantage of the renewable energy of the earth, in a “free” way.
  • It significantly reduces heating costs.
  • It allows to combine the system with a domestic hot water tank or the heating of an inground pool.
  • This type of geothermal energy can be adapted more easily in urban areas.

Disadvantages

The costs of its implantation are very high, sometimes more than the horizontal sensor system, but the return on investment is profitable in the long term.

In short, the two geothermal systems provide a real long-term advantage over how to heat. If you are starting a geothermal heating project, it is important to seek the advice of an expert on the subject. Plastech Plus offers all the drilling and geothermal products required, contact us today!

© Copyright 2017 Plastech Plus inc. - All rights reserved.
Web Design by Adeo