Cart Login Logout Français
 

Products


Polymers & Control Agents

A leading supplier of Drill Muds, Polymers, PVC Pipe, and Ground Sampling Supplies, Plastech Plus Inc. is fully committed to helping your company tackle the toughest jobs in the field.


QUESTIONS? CALL US!
1 800 661-6443

Polymers & Control Agents
AQF-2™ Foaming Agent
AQF-2™ Foaming Agent

AQF-2 foaming agent is an anionic surfactant. AQF-2 foaming agent can be added to fresh water for air/foam, air/gel-foam, or mist drilling applications.

Add to quote
Specs sheet
BENSEAL® Sealing and Plugging Agent
BENSEAL® Sealing and Plugging Agent

Benseal is a granular (8-mesh), natural Wyoming sodium bentonite for use in sealing and grouting well casings and earthen structures. Benseal is not recommended for use as a drilling mud.

Add to quote
Specs sheet
EZ-MUD® GOLD Clay and Shale Stabilizer
EZ-MUD® GOLD Clay and Shale Stabilizer

EZ-MUD GOLD clay and shale stabilizer, helps provide inhibition of clay and shale formations in water-based drilling fluids without substantially increasing viscosity.
EZ-MUD GOLD stabilizer, when added to a QUIK-GEL® or BORE-GEL® slurry, yields an inhibitive drilling fluid system while maintaining manageable and effective fluid properties.

Add to quote
More info
Specs sheet

The unique beaded structure of EZ-MUD GOLD stabilizer allows the material to be mixed easily at minimal shear, eliminating the need for liquid emulsions.

N-SEAL™ Lost Circulation Material
N-SEAL™ Lost Circulation Material

N-SEAL acid soluble lost circulation material is specially formulated extrusion spun mineral fiber. Due to its solubility in weak acids, N-SEAL material is easily removed from production zones.

Add to quote
More info
Specs sheet

N-SEAL material can be used as an additive for loss of circulation in concentrations of up to 70 lb/100 gallons (86 kg/m3).

SODA ASH
SODA ASH

Soda Ash granular powder is primarily used to help condition and soften make-up water and raise pH.

Add to quote
More info
Specs sheet

Applications/Functions

  • Treat out hardness due to calcium in make-up water
  • Raise pH
QUIK-TROL® LV
QUIK-TROL® LV

QUIK-TROL LV, modified natural cellulosic polymer, provides filtration control in most water-based drilling fluids without substantially increasing viscosity. QUIK-TROL LV, when added to a QUIK-GEL® or BORE-GEL™ slurry, yields a drilling mud system suitable for drilling in sandy formation. QUIK-TROL LV can be added to vegetable or mineral oil to provide an oil-based fluid suspension, which can be poured into drill string directly.

Add to quote
More info
Specs sheet

Recommended Treatment

  • Using a Venturi Mixer, or into vortex of a high-speed stirrer, add slowly and uniformly to the entire circulating system. 

 

Approximate Amounts of QUIK-TROL® LV Added to Water Based Fluids
Desired Condition/Result
Added to fresh or salt water: lb/100 gal kg/m³
To stabilize water sensitive formation 3 – 7 4 – 8.5
To reduce torque and lower circulating pressure 0.5 - 2 0.6 - 2.4
Added to QUIK-GEL® slurry (25 lb/100 gallons) or (30 kilograms per m³): lb/100 gal kg/m³
To reduce filtration rate and improve borehole stability 0.5 - 2.0 0.6 - 2.4
Added to BORE-GEL™ slurry (35 lb/100 gallons) or (42 kilograms per m³): lb/100 gal kg/m³
To reduce filtration rate and improve borehole stability 0.5 - 2.0 0.6 - 2.4
Note:
Very salty waters may require twice as much QUIK-TROL LV as fresh water. Preferably, QUIK-TROL LV should be mixed in fresh water before it is added to very salty water.

 

Packaging

QUIK-TROL LV is packaged in a cardboard box containing 10 airtight sealed plastic bags. Each bag contains 2-lb (0.91 kg).

 

QUIK-TROL®
QUIK-TROL®

QUIK-TROL, modified natural cellulosic polymer, provides filtration control in most water-based drilling fluids. QUIK-TROL, when added to a QUIK-GEL® slurry, yields a drilling mud system suitable for drilling in sandy formation. QUIK-TROL can be added to vegetable or mineral oil to provide an oil-based fluid suspension which can be poured into drill string directly. QUIK-TROL is also used in air/gel-foam drilling. 

Add to quote
More info
Specs sheet

Recommended Treatment

  1. Using Venturi Mixer, or into vortex of a high speed stirrer, add slowly and uniformly through entire circulating system.
  2. Used to slug down the rods to produce a high viscosity hole cleaning sweep. 
Approximate Amounts of QUIK-TROL Added to Water Based Fluids
Desired Condition/Result
Added to fresh or salt water: lb/100 gal kg/m³
To stabilize water sensitive formation 3 – 5 4 – 7
To reduce torque and lower circulating pressure 0.5 - 1 0.6 - 1.0
Added to QUIK-GEL® slurry (25 lb/100 gallons) or (30 kilograms per m³): lb/100 gal kg/m³
To enhance drilling mud fluid properties 0.5 - 1.5 0.6 - 1.7
To improve drilling mud suspension and stabilization capabilities 0.5 - 1.5 0.6 - 1.7
Added to injection liquid in air/foam drilling: lb/100 gal kg/m³
To improve foam performance and hole condition 0.5 - 1.5 0.6 - 1.7
Note:
Very salty waters may require twice as much QUIK-TROL as fresh water. Preferably, QUIK-TROL should be mixed in fresh water before it is added to very salty water.

Packaging

QUIK-TROL is packaged in a cardboard box containing 10 airtight sealed plastic bags. Each bag contains 2-lb (0.91 kg).

QUIK-GEL®
QUIK-GEL®

QUIK-GEL is an easy-to-mix, finely ground (200-mesh), premium-grade, high-yielding Wyoming sodium bentonite. QUIK-GEL provides viscosity, fluid loss control and gelling characteristics to freshwater-based drilling fluids.

Add to quote
More info
Specs sheet

Recommended Treatment

Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.

 

Approximate Amounts of QUIK-GEL Added to Freshwater
Application/Desired Result lb/100 gal lb/bbl* kg/m³
Normal Drilling Conditions 15-25 6-10 18-30
Unconsolidated Formations 35-50 15-21 42-60
Make-Up For Gel/Foam Systems 12-15 5-7 14-18

*1 bbl = 42 U.S. gallons

 

Notes:
For optimum yield, pre-treat make-up water with 1-2 pounds of soda ash per 100 gallons of water (1.2-2.4 kg/m³).

This product has been certified by the National Sanitation Foundation (NSF) to contribute to no adverse health problems when used as the manufacturer recommends for the construction of potable water wells.
 
Packaging

QUIK-GEL is packaged in 50-lb (22.7-kg) multiwall paper bags.

QUIK-FOAM® High Performance Foaming Agent
QUIK-FOAM® High Performance Foaming Agent

QUIK-FOAM, a proprietary blend of alcohol ethoxy sulfates (AES) which are biodegradable, is an effective foaming agent. QUIK-FOAM can be added to fresh, brine, or brackish water for air/foam, air/gel-foam, or mist drilling applications.

Add to quote
More info
Specs sheet

 

Recommended Treatment
Approximate Amounts of QUIK-FOAM Added to Injection Water
Application Amount/100 gal Amount/bbl Liters/m³
Dry-air drilling (as a dust suppressant) 0.5 - 1 pints 0.2 - 0.5 pints 0.5 - 1.5
Mud-mist drilling in sticky clays 1 - 2 quarts 1 - 2 pints 2.5 - 5
Foam and gel-foam drilling 0.5 - 2 gallons 1.5 - 7 pints 5 - 20
As a slug to clean the annulus 1 pint* 0.5 pints** 0.5**
* in drill pipe, followed by 3 to 5 gallons of water; ** followed by 20 liters (5.3 gallons) of water
Note:
Close product container immediately after use to avoid gelation of remaining QUIK-FOAM.
Product Make-ups for Air Drilling Injection Slurries
Main Ingredient of Injection Slurry Water (gallons) QUIK-GEL® viscosifier (pounds) QUIK-TROL® polymer (pounds) QUIK-FOAM foaming agent (% by volume)
Foam Drilling System 100 ... ... 0.02 - 3.0
Mixing/Injection Procedure
Add QUIK-FOAM to injection water. Inject into the air stream at a rate necessary to maintain hole stability and penetration rate. Increase amount of QUIK-FOAM as required to compensate for downhole water dilution.
Firm-Foam Drilling System 100 ... 0.5 - 1 0.1 - 2.0
Mixing/Injection Procedure
Mix polymer with water before adding QUIK-FOAM. 1-2 pints of EZ-MUD® may be used as a substitute for QUIK-TROL. Inject into the air stream at a rate necessary to maintain hole stability and penetration rate.
Mud-Mist Drilling System 100 25 ... 0.3 - 1.0
Mixing/Injection Procedure
Mix viscosifier with water before adding QUIK-FOAM. Inject into the air stream at a rate necessary to maintain hole stability and penetration rate. Resulting viscosity is 32-40 sec/qt as measured by Marsh Funnel.
Gel-Foam Drilling System 100 12 - 15 1 0.3 - 1.0
Mixing/Injection Procedure
Mix viscosifier and polymer with water before adding QUIK-FOAM. Inject into the air stream at a rate necessary to maintain hole stability and penetration rate. Resulting viscosity is 32-40 sec/qt as measured by Marsh Funnel.

Note:
In some states, it is illegal to discharge any foreign substance into the water shed due to potential contamination of ground water. After use, the foam mixture must be localized in an earthen pit or some type of containment and allowed to biodegrade naturally.
 
Packaging

QUIK-FOAM is packaged in 5-gal (19-liter) plastic containers or in 55-gal (208 liter) drum

 

POLY-BORE™
POLY-BORE™

POLY-BORE is a free flowing, water-soluble, easy mixing, 100% dry granular polymer. POLY-BORE is a very high molecular weight partially hydrolyzed polyacrylamide (PHPA) polymer. When mixed with fresh water, a small quantity of POLY-BORE provides a clear, solid-free, viscous borehole stabilizing fluid for use in drilled shaft, auger drilling, horizontal directional boring, trenching excavation and reverse circulation (RC) rotary drilling. 

 

Add to quote
More info
Specs sheet

Recommended Treatment

Construction Application
Add 3 to 10 pounds (1.4 to 4.5 kilograms) POLY-BORE dry polymer slowly through the hopper to mix with 1,000 gallons (3.8 m³) of fresh water. (See general instructions listed below.)

Reverse Circulation Drilling
Add 0.5 to 1 pound (0.2 to 0.5 kilograms) POLY-BORE dry polymer slowly through the hopper to mix with 100 gallons (0.38 m³) of fresh water. (See general instructions listed below.)

General Instructions
Continue mixing for another 15 to 20 minutes to allow POLY-BORE to hydrate.

  • If POLY-BORE is being added directly to a tank with paddle mixers, make sure the freshwater level is well above the paddles. Add the POLY-BORE slowly to the vortex of the spinning paddles.
  • Measure the funnel viscosity of the polymer slurry and adjust according to required specifications.

Notes:

  • Make-up water used to mix POLY-BORE should meet the following quality:
    • total chloride less than 1500 ppm (mg/L)
    • total hardness less than 150 ppm as calcium
    • total chlorine less than 100 ppm
    • water pH between 8.5-9.5
  • Reduce total hardness of make-up water by adding 1 to 2 pounds (0.45 to 0.9 kilograms) soda ash (sodium carbonate) per 1,000 gallons (3.8 m³) of make-up water. (Do not add in excess as overtreatment can lead to detrimental effects and reduced performance of the drilling fluid).
  • POLY-BORE can be chemically broken down with regular household liquid bleach (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m³) of fluid formulated with POLY-BORE. Do not use perfumed liquid bleach or solid calcium hypochlorite. 

Packaging

POLY-BORE is packaged in 14 lb (6.35-kg) resealable plastic containers. 

 

EZ-MUD® DP
EZ-MUD® DP

EZ-MUD DP is a free-flowing, dry granular synthetic polymer containing partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer. EZ-MUD DP, a water-soluble polymer, disperses and dissolves in fresh water rapidly without forming fisheyes. When mixed with fresh water, EZ-MUD DP hydrates immediately and forms a clear, viscous solution. With its high molecular weight and optimum charge density, EZ-MUD DP provides excellent borehole stability through a coating mechanism (encapsulation). 

Add to quote
More info
Specs sheet

Notes:
For ease in measuring, use a quart and/or liter container graduated in ounces or milliliters such as the plastic cup used with the Marsh Funnel or a kitchen measuring cup.

EZ-MUD DP
lb/100 gal
DRY MEASURE
oz (approx.)
DRY MEASURE
ml (approx.)
0.1 2.0 59
0.3 6.5 192
0.6 13.0 384
0.9 19.5 576
1.2 26.0 768

 

  • Do not over mix and avoid prolonged periods of high shear.
  • When first mixed, EZ-MUD DP tends to develop a viscosity hump, after a couple of circulation cycles the system will smooth out.
  • Make-up water quality can strongly affect EZ-MUD DP polymer slurry viscosity development

Notes:

  • Make-up water used to mix EZ-MUD DP should meet the following qualities:
    • total chloride less than 1500 ppm (mg/l)
    • total hardness less than 150 ppm as calcium
    • total chlorine less than 100 ppm
    • water pH between 5 to 10
  • Reduce total hardness of make-up water by adding 1 to 2 pounds (0.45 to 0.9 kilograms) soda ash (sodium carbonate) per 1,000 gallons (3.8 m3) of make-up water.


EZ-MUD DP can be chemically broken down with regular household liquid bleach (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD DP. Do not use perfumed liquid bleach or solid calcium hypochlorite. 

Packaging

EZ-MUD DP is packaged in 14-lb (6.35-kg) resealable plastic containers.


 

EZ-MUD® PLUS
EZ-MUD® PLUS

EZ-MUD PLUS is a higher molecular weight version of EZ-MUD® with improved properties. EZ-MUD PLUS, a liquid polymer emulsion containing partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer, is used primarily as a viscosifier and borehole stabilizer to prevent reactive shales and clays from swelling and sloughing. The liquid form makes mixing easy. EZ-MUD PLUS is added to low-solids drilling fluids to increase fluid viscosity, and is also used to improve carrying capacity of air/foam injection fluids or low-solids fluids formulated with QUIK-GEL®. 

 

Add to quote
More info
Specs sheet

Recommended Treatment

Approximate Amounts of EZ-MUD ® Plus Added to Drilling Fluid System
Drilling Application/Desired Result Quarts/
100 gal
Pints/bbl Liters/m3
Added to fresh water (To formulate a clay-free drilling fluid)
  • To stabilize water-sensitive formations
1.0 1.0 2.5
  • To stop rod vibration, reduce torque and pumping pressure
1.0 1.0 2.5
Added to QUIK-GEL® bentonite drilling mud (25 lb/100 gal) or (30 kg/m³)
  • To improve hole cleaning, increase hole stability and
0.5 0.5 1.25
Added to injection liquid in air/foam drilling applications
  • To improve foam performance and hole conditions
0.5 0.5 1.25

 

Notes:
EZ-MUD PLUS can be chemically broken down with liquid bleach in regular household concentration (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD PLUS. Do not use perfumed liquid bleach or solid calcium hypochlorite. 

Packaging

EZ-MUD PLUS is packaged in 5-gal (19-liter) and 1-gal (3.8-liter) plastic containers.

 

 

EZ-MUD® Polymer Emulsion
EZ-MUD® Polymer Emulsion

EZ-MUD, a liquid polymer emulsion containing partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer, is used primarily as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing. EZ-MUD is added to low-solids drilling fluids to increase fluid viscosity, and is also used to improve carrying capacity of air/foam injection fluids or low-solids fluids formulated with QUIK-GEL®. 

Add to quote
More info
Specs sheet

Recommended Treatment

Approximate Amounts of EZ-MUD® Added to Drilling Fluid System
Drilling Application/Desired Property Quarts/
100 gal
Pints/bbl Liters/m³
Added to fresh water (To formulate a clay-free drilling fluid)
  • To stabilize water-sensitive formations
1.0 1.0 2.5
  • To stop rod vibration, reduce torque and pumping pressure
1.5 1.25 3.75
Added to QUIK-GEL® bentonite drilling mud (25 lb/100 gal) or (30 kg/m³)
  • To improve hole cleaning, increase hole stability and to improve performance properties
1.0 1.0 2.5
Added to injection liquid in air/foam drilling applications
  • To improve foam performance and hole conditions
0.5 - 1.0 0.5 - 1.0 1.3 - 2.5

Notes:
EZ-MUD can be chemically broken down with liquid bleach in regular household concentration (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD. Do not use perfumed liquid bleach or solid calcium hypochlorite. 

Packaging

EZ-MUD is packaged in 5-gal (19-liter) and 1-gal (3.8-liter) plastic containers.

 

AQUA-CLEAR PFD
AQUA-CLEAR PFD

AQUA-CLEAR PFD is a concentrated liquid polymer dispersant that provides superior mud and sediment removal from the producing formation and gravel pack.
AQUA-CLEAR PFD contains no phosphates.

AQUA-CLEAR PFD is packaged in a 5-gal (19-liters) plastic pail or 1-gal (3.8-liter) plastic container.

Add to quote
More info
Specs sheet

Applications/Functions

  • Disperse mud, sediment and clay from the producing formation and gravel pack in the screened interval.
  • Increase well productivity
  • Reduce development time 

Advantages

  • ANSI/NSF Standard 60 certified
  • Safe to use on all plastics, rubber and metals
  • No harmful vapors
  • Increases well capacity and flow rates
  • Reduces pumping costs 
  • Appearance - straw colored liquid
  • Specific gravity - 1.2 to 1.4
  • pH (neat) - 6.5 to 7.5

Recommended Treatment

  • Determine volume of water in screen area and double the calculated volume to account for water in gravel pack and formation interface or determine the static volume of water and add 50% excess.
  • Once the water volume is determined, calculate the required treatment volume of AQUA-CLEAR PFD by the following formula:
  • AQUA-CLEAR PFD (gal or L) = 0.002 x Water Volume ( gal or L)
  • This equates to one gallon of AQUA-CLEAR PFD for every 500 gallons of water (0.2% by volume) or 2.0 liters of AQUA-CLEAR PFD for every cubic meter of water. ​
  • Mix thoroughly before introducing into well.


The preferable application method utilizes a tremie line with the product applied into the screened area.
If necessary, the AQUA-CLEAR PFD/water solution may be poured into the well.

  • Mixture should be thoroughly blended in well, then agitated using a surge and swab, jetting, or other developmental technique repeatedly every two hours for a period of up to 24 hours. Pump to waste until turbidity clears up and then connect well to distribution system.
     
BARAFOS®
BARAFOS®

BARAFOS, a non-glassy, modified polyphosphate, is used as a thinner and dispersant in freshwater drilling fluids and as an aid in water well development. 

 

Add to quote
More info
Specs sheet

Applications/Functions

  • Disperse the clay particles and sediments so they can be removed during well development
  • Thin the mud and allow cuttings to settle out
  • Disperse reactive clays, which cause problems such as mud rings and bit balling 

Advantages

  • Dissolves and will not re-crystallize in cold water
  • Lower pH than commonly available glassy polyphosphates
  • Inorganic compound 

Typical Properties

  • Appearance - White crystalline
  • Specific gravity - 1.5
  • pH (2% solution) - 7.4 

Recommended Treatment

  • To aid in water well development:
  • Determine volume of water in screen area and double the calculated volume to account for water in gravel pack and formation interface.
  • Completely dissolve 10-20 pounds BARAFOS per 100 gallons water or 12-24 kilograms per cubic meter of water. Jet and surge this solution through the screen and gravel pack during well development. Repeat as necessary. To thin the drilling mud:
    • Add 0.5-1 pound BARAFOS per 100 gallons of drilling fluid (0.6-1.2 kg/m3) slowly at the flow line. For best results, dissolve BARAFOS in a small quantity of water before adding. Product addition becomes less effective if mud weight exceeds 10 lb/gal (1.2 g/cm3). 

Packaging

BARAFOS is packaged in 50-lb (22.7-kg) multiwall paper bags. 

 

 

BENSEAL®/EZ MUD® Slurry
BENSEAL®/EZ MUD® Slurry

The BENSEAL/EZ-MUD slurry combines two widely-used Baroid products into a patented technique that provides a simple, economical method to seal and grout boreholes, well casings and earthen structures. The slurry, after set, develops a high quality grout with low permeability. 

Add to quote
More info

Recommended Treatment

The procedure described below must be followed closely to ensure proper mixing. To pump EZ-MUD/BENSEAL slurry, use a piston, diaphragm or screw-type pump. Avoid using a centrifugal pump if possible.

Typical mixing procedure:

  1. To each 30-gal (113.6 liters) of fresh water, add 10-oz (330 ml) of EZ-MUD and stir well.
  2. Slowly add one 50-lb (22.7 kg) sack BENSEAL to the EZ-MUD/water slurry while stirring gently, no faster than 40 rpm. Do not over mix.
  3. Start pumping to the hole as soon as the slurry is uniformly blended, or when possible, while mixing. After each batch is pumped into the well, immediately flush pump, hoses, and tremie pipe with fresh water or an EZ-MUD/water slurry.

Cautions:

  • From the time BENSEAL is added, application should be completed within 15 minutes.
  • Do not mix over 100 gallons (0.38 m3) per pumpable batch.
  • The grouting method selected will depend upon, and you should carefully consider, all prevailing geological and hydrological factors and any existing regulatory requirements. The grouting process may not be complete until the grout is static at the desired level.

Heat loop grouting

Refer to typical mixing procedure. Do not over mix to avoid entrainment of air which will result in reduced thermal conductivity. For grout volume requirements refer to the following table: 

 

Diameter (inches) Diameter (mm) gal/ft m3/ meter ft/gal meter/ m3
2 51 0.16 0.002 6.25 493.3
3 76 0.37 0.005 2.70 219.2
4 102 0.65 0.008 1.54 123.3
5 127 1.02 0.013 0.98 78.9
6 152 1.47 0.018 0.68 54.9
7 178 2.00 0.025 0.50 40.3
8 203 2.61 0.032 0.38 30.8
9 229 3.30 0.041 0.30 24.4
10 254 4.08 0.051 0.25 19.7
12 305 5.87 0.073 0.17 13.7
14 356 8.0 0.099 0.13 10.1
16 406 10.5 0.130 0.10 7.7
18 457 13.2 0.164 0.08 6.1
20 508 16.3 0.203 0.06 4.9
24 610 23.5 0.292 0.05 3.4
36 914 52.9 0.657 0.03 1.5

Note: Volume of annular space = volume of hole - volume of casing O.D

Sealing casing

  1. Pump the prepared BENSEAL/EZ-MUD slurry through a tremie pipe inserted down the annular space to the bottom of the hole.
  2. Fill the annulus uniformly from the bottom up, and withdraw the tremie pipe slowly as the slurry is discharged.

Notes:

  • In sealing casing, make sure that a "casing shoe shut-off" has been established between the bottom of the casing and the hole. This ensures that the sealing slurry remains in the annulus.
  • Pump until the grout returned at the surface is of the same consistency as the grout being pumped into the hole.

Plugging and abandoning boreholes:

  1. Pump the prepared BENSEAL/EZ-MUD slurry through an open-ended drill pipe.
  2. Fill the hole from the bottom up and withdraw the drill pipe slowly as the hole fills to prevent pipe from becoming stuck. 

Packaging

BENSEAL is packaged in 50-lb (22.7 kg) multiwall paper bags, containing 0.7 ft3 (0.02 m3). EZ-MUD is packaged in a 5-gal (19-liter) plastic containers. It is also available in cardboard cartons, which contain four 1-gal (3.8-liter) containers.

 

CON DET® Wetting Agent
CON DET® Wetting Agent

CON DET® proprietary blend of anionic surfactants is specially formulated for use in fresh water, salt water, and in low-solids drilling fluids as a wetting agent.


 

Add to quote
More info
Specs sheet

Recommended Treatments

 

Approximate Amounts of CON DET Added to Fresh or Salt Water
Desired Condition/Result Amount/
100 gal
Amount/bbl Liters/m3
To promote bit cleaning and to settle cuttings 2-4 pints 1-2 pints 2-5 liters
To reduce stickiness of clays 2-4 quarts 1-2 quarts 5-10 liters

Packaging

CON DET is packaged in 5-gal (19-liters) plastic containers.

 

© Copyright 2017 Plastech Plus inc. - All rights reserved.
Web Design by Adeo